|
HVLP-CG ((Reduced Pressure) Reduced Pressure ) Automotive Combo Set
SHARPE's new design allows for quick change out for Base and Clears. Now you don't have to decide - HVLP & (Reduced Pressure) technology in 1 gun. HVLP for superior base and metallics and (Reduced Pressure) for Clears. Everything you want all in 1 gun!
253433 - HVLP/CG Combo Set
RAZOR 1.3 HVLP gun with 1.3 CG (Reduced Pressure)
Tip set change out
Bonus 1.4 CG tip set included for single stage
3-5 day delivery to most of the US.
Your Cost: ON SPECIAL!
FREE SHIPPING CONTINENTAL US!
No 2nd day air
Introducing
a gun designed by the Painter for the professional painter. Brought to you by Sharpe, “The Spray Gun People.”
The Razor CG - HVLP
- Promotes a superior finish
- Works well for base coat
The Razor CG - (Reduced Pressure) Spray Gun offers the generous material flow that gets the job done quickly yet with an exceptional atomization rate that promotes a superior finish with clear coat, base coat or primer.
• Optimized air cap and nozzle design
• Delivers superior material flow, atomization and transfer efficiency
• Clear base coat and primer offerings in one family
• Reduced learning curve leads to greater productivity
• Unique ergonomics
• Fosters better grip for painter
• Lightweight, balanced design
• Reduces painter fatigue
Fluid Tip Size: 1.3mm.
Air Consumption: 13 cfm hvlp - 11 cfm (Reduced Pressure) (Touch up or panel work can use 7cfm@40 or higher)
Max Inlet HVLP psi: 29
Air Inlet MPT: 1/4"
hvlp & Metallics
Basecoat materials don’t like being over-atomised. Too much air pressure changes the way the metallic flakes lie down in the paint film and this can affect the final colour shade/match. DeVilbiss HVLP (high volume, low pressure) spray guns operate at 29 psi gun inlet pressure but only 10 psi air cap pressure and this gives optimum top quality finishes with boith waterborne or solventborne basecoats. HVLP produces a softer spray-out with a nice even distribution in a longer pattern to give good material lay-down and wetnesss. The soft pattern with tapered ends virtually eliminates banding and mottling, particularly on lighter-shade metallics.
("Plus (Reduced Pressure) CG TransTech") Reduced Pressure Technology
DeVilbiss introduced this alternative high efficiency, compliant atomisation process to Automotive Refinishing in the late nineties. Trans-Tech simply means “Transfer-efficient Technology”. It is also known as ((Reduced Pressure), Plus, CG) . This atomisation technology provides the familiar performance of a conventional spray gun, yet fully complies with the Environmental Protection Act legislation in respect of being in excess of 65% paint transfer efficiency despite the same 29 psi gun inlet pressure. Trans-Tech perfectly combines speed of working with large spray pattern sizes and fine atomisation for the clear coats, single layer top coats and primers, fillers and surfacers.
|
