BONUS PACKAGE
CVi 620G Standard Automotive
CVi 620GW Waterbased Automotive
(each can do water and solvent the only difference is the cup)
DeVilibss CVI Compact
1.2, 1.3 Tip Sets Waterbase Base / Clear
Newest & Better Complaint
510 TransTech Aircap
Plastic Cup
Bonus
DeKups Starter Package
2 REGS: - STANDARD + BONUS DeVilbiss Digital Regulator
 
BONUS 20 Tool Hi-End Cleaning Kit
|
DeVilibss CVI Compact
1.3, 1.4 Tip Sets Waterbase Base / Clear
Newest Complaint
DeVilbisses Best TransTech Aircap
Aluminum Cup
2 REGS: STANDARD + BONUS DeVilbiss Digital Regulator
BONUS 20 Tool Hi-End Cleaning Kit
|
• DeVilbiss digital gauge with air adjusting valve. This lightweight, UL/CSA approved gauge will give precise air control, especially important with waterborne materials. • Accuracy to +/_.5 psi • UL/CSA approved • Gauge range: 2.5 to 160 psi • Auto off after 45 seconds to conserve battery life. • Up to four_year battery life, depending on usage • Ideal for HVLP or high efficiency guns – high air flow / low pressure drop • Solvent resistant • Replacement gauge (without valve): DGI_101 (803289) • The DeVilbiss digital gauge is very simple to use. The pressure display shuts off automatically after 45 seconds to conserve battery life. Simply press the “On” button (“>”) to reactivate the display. • To see if calibration is needed, turn the gauge on when it is not pressurized. If it reads “0.0,” there is no need to calibrate. On the infrequent occasions where calibration is required, follow the simple instructions on the gauge or the package.
| Air Inlet Pressure |
29psi |
| Air Consumption (510 Air Cap) |
283 l/min (10cfm) (7 for panel work) |
| Air Inlet Thread |
1/4” Universal (m) |
| Cup Capacity |
1 litre Aluminum or 20oz Acetel |
| Weight |
435 gm |
| Air Cap & Ring |
Plated Brass |
| Fluid Tip |
Stainless Steel |
| Fluid Needle |
Stainless Steel |
HLVP
Basecoat materials don’t like being over-atomised. Too much air pressure changes the way the metallic flakes lie down in the paint film and this can affect the final colour shade/match. DeVilbiss HVLP (high volume, low pressure) spray guns operate at 29 psi gun inlet pressure but only 10 psi air cap pressure and this gives optimum top quality finishes with boith waterborne or solventborne basecoats. HVLP produces a softer spray-out with a nice even distribution in a longer pattern to give good material lay-down and wetnesss. The soft pattern with tapered ends virtually eliminates banding and mottling, particularly on lighter-shade metallics.
Trans-Tech (Plus (Reduced Pressure) technology
DeVilbiss introduced this alternative high efficiency, compliant atomisation process to Automotive Refinishing in the late nineties. Trans-Tech simply means “Transfer-efficient Technology”. This atomisation technology provides the familiar performance of the legendary JGA gun, yet fully complies with the Environmental Protection Act legislation in respect of being in excess of 65% paint transfer efficiency despite the same 29 psi gun inlet pressure. Trans-Tech perfectly combines speed of working with large spray pattern sizes and fine atomisation for the clear coats, single layer top coats and primers, fillers and surfacers. |
