|
|
|
SPECIAL
PRICED PRODUCT PAGES!
BINKS
- Binks M1-G Gravity Feed Gun
|
|
|
|
 BINKS M1G
| Fluid Nozzle Sizes (most important selection) |
Recommends auto/boat top coats/plane top coats
94 for clear (base okay) |
|
| Auto 93 for base only |
|
| Wood 1.2 stains 1.5 or 1.7 for standard wood products |
|
 |
| Lighter bodied materials less than 20 sec Zahn #2 (most auto / boat / marine top coats) |
|
| 92 |
1.2 |
| 93 |
1.3 |
| 94 |
1.4 |
| Medium Bodied materials 20-60 sec Zahn #2 (most wood products) |
|
| 95 |
1.5 |
| 96 |
1.6 |
| 97 |
1.7 |
| 903 |
2.0 |
| Greater than 60 sec in Zahn #2 (industrial, Gel Coat, Latex) |
|
| 905 |
2.3 |
| 906 |
2.5 |
| 909 |
2.8 |
| AIR CAPS |
Recommends |
|
| AIR CAP 93 P for most standard lighter or medium bodied materials |
|
| AIr Cap 97 P for heavier full bodied materials |
|
|
| Air Cap 90 |
5-8 SCFM |
| Air Cap 92 |
7-8 SCFM |
| Air Cap 93 P* |
7-10 SCFM |
| *best for for lighter or medium bodied materials |
|
| Air Cap 94 P |
11-13 SCFM |
| Air Cap 95 P, 95AP, 905P |
14-22 SCFM |
| Air Cap 96 G |
14-19 SCFM |
| Air Cap 97P*, 97AP, 907P |
14-22 SCFM |
| *most common setup for heavier materials, high solids |
|
| 95 S, 95AS - not recommended |
|
|
BINKS
- Binks Mach 1 G (M1-G) GRAVITY FEED GUN
|
