|
|
 BINKS Mach 1, Mach 1 SL, Mach 1 Featherlight
| Fluid Nozzle Sizes (most important selection) |
Recommends auto/boat top coats/plane top coats
1.0 - 1.2 for clear (base okay) |
|
| Auto .8 - 1.0 for base only |
|
| Wood .8 stains 1.0 - 1.4 for standard wood products |
|
 |
| Lighter bodied materials less than 20 sec Zahn #2 (most auto / boat / marine top coats) |
|
| 89 |
0.5 |
| 90 |
0.8 |
| 91 |
1.0 |
| 92 |
1.2 |
| Medium Bodied materials 20-60 sec Zahn #2 (most wood products) |
|
| 93 |
1.3 |
| 94, 94S (S for Siphon Feed) |
1.4 |
| 95 |
1.5 |
| 96 |
1.6 |
| Greater than 60 sec in Zahn #2 (industrial, Gel Coat, Latex) |
|
| 97, 97S (S for Siphon Feed standard is 1.7*) |
1.7 |
| Specialty Nozzles |
| VERY HEAVY FLUIDS: |
|
|
| Block Fillers, Texture Coatings, Fire
Retardants, Road Marking Paint,
Bitumastics, dhesives, Celluar
Plastisols, Underbody & Vitreous
Coatings, Special Applications |
| 94VT (VT Corrosion Control Carbide Tip) |
1.3 |
| 901VT (VT Corrosion Control Carbide Tip) |
1.6 |
| 903 |
2.0 |
| 905 |
2.3 |
| 905VT (VT Corrosion Control Carbide Tip) |
2.3 |
| 906 |
2.5 |
| 909 |
2.8 |
| 909VT (VT Corrosion Control Carbide Tip) |
2.8 |
| AIR CAPS |
Recommends |
|
| AIR CAP 93 P for most standard lighter or medium bodied materials |
|
| AIr Cap 97 P for heavier full bodied materials |
|
|
| Air Cap 90 |
5-8 SCFM |
| Air Cap 92 |
7-8 SCFM |
| Air Cap 93 P* |
7-10 SCFM |
| *best for for low air systems |
|
| Air Cap 94 P |
11-13 SCFM |
| Air Cap 95P, 95AP, 905P |
14-22 SCFM |
| *most common setup for ligher materials, high solids |
|
| Air Cap 96 G |
14-19 SCFM |
| Air Cap 97P*, 97AP, 907P |
14-22 SCFM |
| *most common setup for medium and heavier materials, high solids |
|
| 95 S, 95AS - Siphon Feed |
|
|
