Asturo Low Air Spray Gun

EVERYTHING! ALL STAINLESS HVLP & HTE (Reduced Pressure) / HTE
Plug and Play 4-6 cfm @ 30 PSI
Small Compressor, No Problem!
PRESSURE FEED / Suction SETUP
1.0/ 1.3 / 1.4 / 1.5 / 1.8 / 2.0 / 2.5 Options

SprayGunWorld: This is simply the finest gun at this price point. All stainless steel, professional warranty, drop forged construction. Completes with guns costing $300-$500 but priced with lower line guns by Binks and DeVilbiss .
"...these guns are awesome, I can't believe how much precise control I have of the fan pattern and how much material they are able to lay down. I only wish I had upgraded years ago. Also I'm very happy with the pressure pot setup. Thanks again!" - Customer

1 LITER 3M PPS DISPOSABLE CUPS ON THE GUN (w/ Off the gun optional add on feature)

1 QUART ALUMINUM ON THE GUN
(w/ Off the gun optional add on feature)

2 QUART w/ WELDED HOSE

2 1/2 GALLON w/ WEDLED HOSE

1 LITER ON THE GUN PPS SYSTEM

NEW OPTION! Use Pot On the Gun or as a remote pot with 6 foot or 15 foot lines (optional see below)
welded hose

List Price: ~~$540.00~~
Special $420.00
w/ 1 Liter on the gun pressure pot PPS System and Pressure Tubing and Deluxe Fluid Regulator. (lids and liners sold separately see below)

OPTIONS

Add on Special $24.00
Starter pack of 10 lids and liners for above gun Limit 1 per gun

Add on Special $50.00
Starter pack of 25 lids and liners for above gun Limit 2 per gun

OPTIONS

RUN GUN OFF A 1 LITER PPS PRESSURE POT WITH HOSES OPTION

6 or 15 Foot Hose With Adapter to run pot off the gun and get into smaller areas.

Or you can get a small 9oz pps cup on the gun which is only 4 inches.

welded hose pps 1 liter

1 QUART ON THE GUN COMPLETE

Razor

welded hose
NEW OPTION! Use Pot On the Gun or as a remote pot with 6 foot or 15 foot lines (optional see below)
1 quart pressure pot

List Price: ~~$490.00~~
Special $398.00
w/ 1 quart on the gun pressure pot

OPTIONS

RUN GUN OFF A 1 QUART PRESSURE POT WITH HOSES OPTION

6 or 15 Foot Hose With Adapter to run pot off the gun and get into smaller areas.

Or you can get a small 9oz cup also which is only 4 inches.

welded hose 1 quart pressure pot

• Full Stainless Steel All Wetted Parts Fluid Passages, Fittings, and Tip and Needle Sets.
• HVLP & HTE (Reduced Pressure)
• 4-6 cfm @ 40 PSI
• Asturo 1 Quart Pressure Pot with Fluid Regulator
• Tip sizes 1.0-2.5

Waterbase / Solvent based WB X-Series II - The Lowest CFM Requirements in a full performance HVLP & HTE (Reduced Pressure) spray gun. An amazing 4-6 CFM when equivalent guns take between 8-12 CFM. Compliant with all international HVLP & HTE (Reduced Pressure) legislative requirements for reduced solvent emissions and improved environmental protection.

All stainless steel fluid system including all fittings for water and solvent base.

SprayGunWorld: Highly Recommended for all applications.

SUPER SALE:HVLP & HTE (Reduced Pressure) Spray Gun w/ 1 Quart Pressure Pot and Fluid Regulator

2 QUART SYSTEM w/ WELDED HOSE

Razor

pressurepot welded hose

List Price: ~~$520.00~~ Special: ~~$420.00~~ SALE $398.00 6' Hoses / 15' Hoses

• Full Stainless Steel All Wetted Parts Fluid Passages, Fittings, and Tip and Needle Sets.
• HVLP & HTE (Reduced Pressure)
• 4-6 cfm @ 40 PSI
• Asturo 2 Quart Pressure Pot with stainless steel pickup tube
• Tip sizes 1.0-2.5
• Special single line welded hoses.

Please state in comment section on check out if you want a 15' hose swap out for an additional $20.00.

All stainless steel fluid system including all fittings for water and solvent base.

SprayGunWorld: Highly Recommended for all applications.

SUPER SALE:HVLP & HTE (Reduced Pressure) Spray Gun w/ 2 Quart Pressure Pot and 6' or 15' single line welded Hoses Kit:

2 1/2 GALLON w/ WELDED HOSE
SUPER SALE:HVLP & HTE (Reduced Pressure) Spray Gun w/ 2 1/2 Gallon Single Regulated Pressure Pot and 15' or 25' welded Hoses Kit:

Razor

pressurepot welded hose

List Price: ~~$778.00~~ Special Starting from $620.00

• Full Stainless Steel All Wetted Parts Fluid Passages, Fittings, and Tip and Needle Sets.
• HVLP & HTE (Reduced Pressure)
• 4-6 cfm @ 40 PSI
• Professional Asturo 2 1/2 Gallon Pressure Pot Single Reg Teflon Coated both inside and Out for easy cleanup.
• Tip sizes 1.0-2.5
• 15' hoses welded for easy use (25' hoses available)

All stainless steel fluid system including all fittings for water and solvent base.

SprayGunWorld: Highly Recommended for all applications.

• Full Stainless Steel All Wetted Parts Fluid Passages, Fittings, and Tip and Needle Sets.
• HVLP & HTE (Reduced Pressure) gun drop forged aluminum body
• 4-6 cfm @ 40 PSI

line

Cabinet Example Shown below
However, gun is good for all water and solvent based industrial materials.
1.0/ 1.3 / 1.4 / 1.5 / 1.8 / 2.0 / 2.5 Options