|
|
|
SPECIAL
PRICED PRODUCT PAGES!
|
|
WB WATERBASE / SOLVENT ALL STAINLESS STEEL
|
|
|
 |
PlateAll's cold spray process offers the ability to achieve a seamless metal finish with the appearance of solid cast metal. A variety of finishes are available.
Aluminum
Aluminum will allow you to achieve a smooth texture, and finishes of satin, high gloss, or mirror.
Brass
Brass will allow you to achieve a variety of textures, smooth, and semi smooth, and finishes of matte, satin, high gloss, or mirror.
Bronze
Bronze will allow you to achieve a variety of textures from, smooth, to semi smooth, and finishes of matte, satin, or high gloss.
Copper
Copper will allow you to achieve a smooth texture, and finishes of satin, high gloss, or mirror.
Iron
Iron will allow you to achieve a variety of textures from semi smooth, to rough, and finishes of matte, satin, or high gloss.
|
 
Extreme Setup Shown with Optional Aluminum Cup
|
PlateAll - It Can Even Rust and Tarnish like Metal, becuase it IS real Metal!
See PLATEALL.com
Premium Stainless Steel Low Air Spray Gun
LVLP Technology in an HVLP Spray Gun
- Adherence to most any surface
- Spray on, Brush on, Roll on or Pour into mold
- Utilitarian and Aesthetic uses
- Residential, Commercial
- Interior, Exterior
110v Compressor Okay - 5-6 CFM @ 40
SGW Exclusive: WB Xtreme 1.5, 2.0
PRO CLEAR MASTER
HVLP / HTE (Reduced Pressure)
Great for Old Conventional Users
Note: This is the Xtreme Version not the Standard Setup found elsewhere
Amazing Features:
Super Fine Spray comparable to the Iwata at 1/2 the price
Super Low CFM - CFM
Stainless Steel Fluid Fittings and Passages (even Fluid Filters are Stainless Steel)
Nylon Waterbased / Solvent Based cup with Stainless Steel Fittings
Small Footprint (size of gun) and Small Regulator
Fully Supported with wide range of tip sets
Rebuild Kit included in package
• HVLP & HTE SETUPSSuper Low HVLP Spray Gun All Stainless Steel passages fittings and tip sets die cast aluminum body
• 600CC Nylon Cup with Stainless Steel Fitting
• Extreme Mini Diaphragm Regulator
• Repair Kit
• 3 Stainless Steel Strainers
• Brush, spanner wrench, air filter
• Molded Case (color may vary)
Specifications: Air pressure 2 Bar (29 PSI), Air cap pressure (10 PSI), Air inlet
1/4” NPS (PS), Fluid inlet M 16x1.5P, Air consumption 6 CFM (283L/min)
|
| |
|
Accessories |
|
SALE: Add a Asturo HVLP 1.9 priming gun
Purchase only with Asturo Auto Xtreme Spray Gun while supplies last
|
|
|
|
Asturo Stand
Special Price with purchase of Asturo Spray Gun Only .
Bench or Wall Mount Filling Station Stand for your HVLP Gravity
Feed Gun
|
|
Asturo Deluxe Kit
Purchase only with Asturo Spray Gun
|
|
Disposable Filters
Purchase only with Asturo Spray Gun
|
|
3M PPS Disposal be Cup Starter Kit. Mix in the
cup, Shake in the cup, Store non catalyzed material in the cup, Sprays Upside down or any direction. 10 second cleanup.
Everything needed to use system including 10 liners (gun sold separately)
|
|
Ford #4 Kit
Purchase only with Asturo Spray Gun - know the viscosity of the material you are spraying for best results
|
|
Blow Gun.
Blow your gun clean through, Nozzle points directly into the fluid passages for directed spray, In addition, blow dust off your paint job between coats. Blow anything you like.
|
|
True N95 Respirator.
Filters Paint Fumes - Replaceable Cartriges available.
|
|
Add a Asturo HVLP 1.9 priming gun
Purchase only with Asturo Auto Xtreme Spray Gun
|
ASTURO SPRAY GUNS
 We also have a wide selection
of quality tools for the Professional and Serious Hobbyist at www.SprayGunWorld.com.
|
