|
•
HVLP 1.8 Top of the line HVLP Priming Gun
• Fast working speed & wide fan pattern
•
Good for primer filers and thicker priming materials
• 0.6 L Aluminum Cup (Aluminum & Plastic cups can be shared between guns)
• An environmentally favorable HVLP system with low air
consumption and high transfer efficiency exceeds 65%
•
To avoid contamination automotive professionals recommend
keeping your priming gun separate from your finishing gun.
Specifications:
Nozzle size: 1.8 mm
Air Inlet NPT: 1/4" (Male)
Cup capacity: 0.6 liter Aluminum
|
•
LVLP Spray Gun with Patented cap nozzle design and use of
lower volume of air finely atomizes paint creating a smooth
finish with minimum overspray
• Stainless steel needle and fluid tip makes it suitable
for water base products
• Decreased overspray creates cost savings over conventional
spray guns
Specifications:
Nozzle Sizes: 1.4mm
Operation Pressure: 25psi
Gun Weight: 1.021lbs
Avg. Air Consumpt.: 9.6CFM (7.8@40)
Air Inlet Thread NPT: 1/4"
Recommended Compressor: 3hp
Max. Pattern at 8" Distance: 8.5" - 9"
Air Hose I.D. Size: 1/4"
Comes with .6 Liter Plastic Cup
10PSI operating pressure
|
