| |
All
Below are our top rated superior Professional
Spray Guns for Woodworkers
If
you need more help you may also try our:
Look at our complete outfits
Here
|
Inexpensive Conventional
Setups $100-$200 |
|
|
"BINKS
MODEL 7" - Outfit
2 Quart Pressure Pot w/ 1.2 Conventional
Spray Gun
1.2 2PG7S
Binks Type General purpose conventional
spray gun. Fast working speed & wide
fan pattern. |
|
|
"BINKS
MODEL 7" - Outfit
2 1/4 Gallon Pressure Pot 1.0 Conventional
Spray Gun
1.0 PT2-4GH
"DeVilbiss
Type" - General purpose conventional
spray gun. Fast working speed & wide
fan pattern. 12ft. (Hose included) |
|
$100
Range HVLP |
|
X Series II Standard: Top Recommended*
All Stainless Steel for Water/Solvent Based materials. This is a higher grade of gun than the others in this category - the least expensive HI-END Professional pressure
pot gun for serious woodworkers. You get a professional
gun at the lowest price point possible for
a pressure setup. SprayGunWorld: Simple, this gun sprays as well as a $800 German Sat K 3 and is one of our TOP Recommendations for wood at this price and any price. |
|
|
Recommended*
Binks SV100 Pro Series. Professional pressure
pot series for woodworkers. You get a professional
gun with multiple setups for all types of materials. SprayGunWorld: Great for Hi-Production environment. This is one of our TOP Recommendations for woodworkers who want to spray all types of materials. |
|
Recommended*
LCFM. Industrial tough HVLP Spray Gun for Hi-Duty environments. Get a professional
gun for Hi-Duty Facilities at the lowest price point possible for
a pressure setup. SprayGunWorld: Top choice for industrial settings with low CFM compressors. |
|
Recommended*
R Series. Professional pressure
pot series for woodworkers. You get a professional
gun at the lowest price point possible for
a pressure setup. SprayGunWorld: Top choice for budget minded Super Low 5 CFM compressors. |
|
Shown with siphon cup - X Series II PERFECTION: Top Recommended*
All Stainless Steel for Water/Solvent Based materials. GET BOTH HVLP & HTE SETUPS like 2 guns in one. The least expensive HI-END Professional pressure
pot gun for serious woodworkers. You get a professional
gun at the lowest price point possible for
a pressure setup. SprayGunWorld: Simple, this gun sprays as well as a $800 German Sat K 3 and is one of our TOP Recommendations for wood at this price and any price. |
 |
Shown with PPS System - Ultra Compact HVLP: The smallest full size gun in the world. Full size performance in a smaller sized gun to get into tighter spaces. SprayGunWorld: Great for woodworkers getting into assembled pieces. Also great for desks and drawers. |
|
$300+
Range |
|
X Series II Deluxe HVLP & Reduced Pressure Transtech
All in 1 gun includes 1.0 & 1.3, 1.5 tip sets.
Patterned after Japanese Iwata Guns, Meet the European Asturo Superior Top of the Line Fine
Finish Pressure Gun. Super fine finishes on small to larger compressors. All Stainless Steel for both waterbase and solvent based materials. For professional production work
where a superior finish is required. Extra
Tips Available.
6 CFM @ 40PSI |
|
|
Fe-Line Fine Finish - LOOKING FOR USA MADE PRODUCT STILL?
FINEST USA HVLP ON MARKET Recommended
GAURANTEED SATISFACTION OVER THE BINKS MACH
1 OR YOUR MONEY BACK
.8 - 1.7 tip sets Fe-Line Fine Finish
If
you like the Binks Mach 1, take a look at
CAT's Superior Top of the Line Fine
Finish Pressure Gun. Designed especially
for the woodworking market. Superior toning
and shadding. Better than the Devilbiss
VTX. Good for professional production work
where a superior finish is required. Extra
Tips Available.
12.5 CFM @ 40PSI |
|
|
|
LOW AIR Fe-Line LCFM (low CFM)
.8
- 1.7 tip sets
Lynx LCFM
For those people with less air but still
need HVLP. Pressure Feed HVLP Gun 1.3 Tip.
Woodworking Enamels & Lacquers quality
spray gun. Fast working speed & wide
fan pattern Anodized gun body. 4-10 CFM @40PSI |
|
|
Eurpean Beauty - the tightest smallest toughest guns with a fantastic European feel.
LOW AIR ANI
.8
- 2.5 tip sets Ani F1 Perfection
Pressure Feed HVLP Gun 1.3 Tip.
Woodworking Enamels & Lacquers quality
spray gun. The smallest Hi-End gun on the market. Great for getting into tight spaces. On the fly fan control. 7-8 CFM
SprayGunWorld: Our Finest LOW AIR HVLP Gun For those people with less air but still
need HVLP. |
|
Iwata LVLP 200 Series LVLP Series by Iwata. The Finest Spray Guns in Japan. SprayGunWorld: This is an amazing gun full sizes with strong break up power. |
| |
|
|
|
 |
|
|
|
What
tips should I get?
Recommendations are to be used as a starting
point reference and are not an absolute application for all
refinish material brands. They are not meant to imply that any
given air cap/fluid tip combination can not be used to successfully
spray any given refinish material. Technique and personal preference
must also be considered.
As a general Rule, a 1.7-1.8 HVLP can handle
most materials.
If you want a more exact match, Generally, go smaller
for Clears Urathanes (1.3) and larger for base coats and Wood
Waterbornes (1.5&1.6) and larger still for primer surfacers,
lacquers and enamels (1.5-1.8). We recommend the DeVilbiss Guns
because they generally come with multiple tips to handle all
your finer refinishing needs.
|
Generic
Chart
|
|
HVLP
Gravity
|
Compliant
Gravity
|
Pressure
Feed
|
Single
Stage Urethanes and Polyurethanes
|
Fluid Tip Size
|
1.4mm*
1.5mm
1.6mm |
1.4mm
1.6mm
|
0.8mm - 1.4mm
|
Base
Coats / Conversion Varnish
|
Fluid Tip Size
|
1.3mm
1.4mm*
1.6mm |
1.4mm
1.6mm
|
0.8mm - 1.4mm
|
Clears
|
Fluid Tip Size
|
1.3mm
1.4mm*
1.5mm
1.6mm |
1.2mm
1.3mm
1.4mm
1.6mm
|
0.8mm^
1.0mm
|
Inks,
Dyes, Solvents, Stains
Zahn #2 15 and lower |
Fluid Tip Size
|
.8mm*
1.0mm*
1.2mm
|
.8mm*
1.0mm*
1.2mm
|
0.8mm^
1.0mm
|
Hi-Solid
Clears
|
Fluid Tip Size
|
1.2mm
1.3mm*
1.4mm*
|
1.2mm*
1.3mm*
|
0.8mm^
1.0mm
|
Lacquers
and Enamels
Zahn #2 20 and higher |
Fluid Tip Size
|
1.6mm* or
1.8mm*
2.0mm
2.2mm |
1.6mm*
1.7mm*
1.8mm
|
1.2mm-1.6mm
|
| Waterbornes
/ Acrylic Varnish |
Fluid Tip Size |
1.4mm*
1.5mm*
1.6mm |
1.4mm*
1.5mm*
1.6mm |
1.0mm*
1.1mm*
1.2mm *
|
| Latex
- Only works with thinned latex. Not recommened for house
painting (unless you want your house to look like glass).
Popular items include, trim, cabinets, doors, garage doors,
fireplaces, decorative artwork, etc. |
Fluid Tip Size |
1.8mm* Thinned 33%
2.0mm* Thinned 15%
2.2mm Thinned 10%
|
1.8mm*
2.0mm*
2.2mm |
1.4mm*
1.8mm*
|
Latex & BOATS: Gelcoats 2.0 / 2.2
Motorcycles: We recommend the Asturo WB Mini 1.0SR.
WoodWorking: Asturo WB Mini 1.2SR
Pressure Pot Series DeVilbiss or
CAT or Asturo WB Mini
AirCraft DeVilbiss Pressure GTI 1.4 Tip Industrial / Touch up Asturo WB Mini 1.2
|
|
