| |
|
|
Gravity
Feed
Gravity Feed SETUP: Many woodworkers enjoy a pressure setup.
This gives them greater control over how much material they lay
on and is good for woodworkers who experiment with different and
unconventional material. These setups also allow for hookup to
larger pots for production facilities or shops where large volume
of material is applied. We have several pressure setup available
from those starting out to industrial 2-5 gallon tank setups.
|
|
|
|
SMALL
COMPRESSOR LOW AIR WOOD SECTION
Click Here
|
Starter Set |
|
Recommended*
Advanced Design 3 gun set - 5CFM@40 - Designed to spray
both primer and base/clear/single stage paints for
under $100.00 These guns are good enough for a professional
but have been brought to you at a price
point equal to most lower grade hobby guns at Sears,
Harbor, and your local home improvement store. They
have Low air consumption and stainless steel needle
and tip. They are a great bargain and we recommend
them for any serious hobbyist or beginnig professional.
ToolParadise: Great inexpensive starter
set for the hobbyist. Solid quality at an affordable price.
Our entry level choice for serious
hobbyists. Much better than the guns purchased at
Sears and Home Depot, or Harbor. |
|
$100
Range |
*TP PROFESSIONAL WOODWORKER LOW PRICE CHOICE |
Recommended*
Astro EVO, QUL Series Low air consumption
and stainless steel needle and tip. Great for waterbornes
and laquors and enamels. ToolParadise: Great
guns for the Woodworking professional. One of our
biggest woodworking clients uses these guns almost
exclusively in his production house. Do not be fooled
by the lower price tag. We have had customers who
compare the finish quality on wood to that of a
SATA NR2000. Purchase the 103 for Clears 105 for
Waterbornes and 107 for Laquors and enamels. Can
Purchase Tips Separately. Suggested Setup is 1.7
and add a 1.5 tip set. For EVO Series purchase 1.4 & 1.8 combo set at best price. |
*TP LOW PRICE CHOICE
|
Recommended*
Devilbiss Finishline III - Classic DeVilbiss Finish
at an economical price. This Third generation gun,
precision engineered, produces a well-atomized, uniform
spray pattern with accurate, repeatable settings.
Tip sets are all made in the USA by Sharpe, Gun washer
safe. ToolParadise: Our First Choice
for the serious hobbyist. Comes with all you need
to get started, from gunhook, regulator and tips.
We like the versatility of having an all in one package
with multiple tips. We also like the famous DeVilbiss
Finish. Recommend keeping Gun clean for long life.
This is a great gun. Comes with 1.8 Tips. For Single
Colors and Waterbornes 1.8 tip for thicker enamels
and Laquors. 2.2 Latex Tip Available. New Student Sets Available for lowest price in US. |
|
|
Recommended*
Finex Woodworking
A Great Professional Gun at an unbelievable price. |
|
Lowest Priced USA Made* Spray Gun on market. ToolParadise: If you have an 8cfm or larger compressor this is one hell of a bargain. Same finish quality as a $400 spray gun for under $200.00 - Automaster / Wood Master |
|
$200
Range |
|
|
Recommended*
Lower Air DeVilbiss GFG 670 High Efficiency Spray
Gun - Don't let this gun fool you. This is a
professional gun comparable to its HVLP brothers.
It is a high solids clearcoat gun of choice –
precision-engineered #410 air cap lays out a smooth,
high gloss finish. DeVilbiss quality creates a gun
with a higher transfer efficiency – Greater
than 65% transfer (comparable to the SATA RP). Includes
three tips, which eliminates guesswork, and is Waterborne
compatible.ToolParadise: This is our favoite
woodworking gun for the professional or serious
Hobbyist. Don't let its non HVLP status fool you.
This gun lays down a superior even finish with little
overspray. Woodworkers need to order the 1.6 tip
set. 1.8 tip set available for thinned latex. |
|
|
Recommended*
Sharpe Razor CG - Premium performance and quality.
Excellent results with all materials including waterbornes.
Only 30 PSI inlet delivers 10 PSI air cap spraying
pressure. ToolParadise: Great Middle
of the Line Gun. Comparable in quality with the SATA
RP but 1/2 the price. If you are looking at the Sata
RP take a look at this alternative. This is a solid
gun to start your spray gun platform on. 1.6 Laquers
& Enamels 1.4 Waterbornes. |
|
Recommended*
Super low CFM - Premium performance and quality.
Excellent results with all materials including waterbornes. ToolParadise: Great Middle
of the Line Gun. Great for those with as little as 5CFM Compressors. |
 |
Recommended*
ALL STAINLESS STEEL WB - Low CFM - Premium performance and quality.
Excellent results with all materials including waterbornes. ToolParadise: One of the finest low costs systems available. |
|
|
Recommended*
LOW AIR Jaguar J100H HVLP Recommended GAURANTEED
for LIFE!
1.0 - 2.2 tip sets Jaguar
100
Runs on as little as 2 HP Compressor. 6 CFM. Good
for Woodworkers and autobody workers with less air.
USA quality, all stainless steel fluid passage, Forged
aluminum body. Higher atomization - 1.5 woodworking
waterbased materials, 1.7 lacquers and enamels. 2.2
for latex applications. |
|
$300
Range Best Money Can Buy |
|
|
Recommened*
SATA 3000 RP or 3000 HVLP Superior finish. Variable
fan control, fluid adjustment and built-in air micrometer
Inetlet pressure with digital controls in the digital
version. ToolParadise: Wow! What a gun.
If you are looking for the best finish and price
is no object look no further. 1.4 rp, 1.5 HVLP waterbornes
laquers and enamels thinned 20%-30% or 1.6 RP, 1.7HVLP
laquers and enamels thinned 10%-20% Use RP for less
air requirements |
|
|
Recommend*
Jaguar SLP 8CFM@40 minimum - The best USA
gun we carry. Warm soft spray pattern, ALL USA made,
Lifetime warranty, oldfashioned customer service.
Good Tech support. Compares to SATA NR 2000. Little
more working speed and material delivery than the
SATA. Just as good a gun as the SATA but lower operating
costs i.e. Tip sets are $68.00. Repair kits $22.00. |
 |
Recommend*
Razor Wood Combos 8CFM@40 minimum - One of the best USA
guns we carry. Fast spray pattern, ALL USA made new lightweight design with ergodinamics. 1.5 & 1.7 tips for HVLP 1.6 for RP. Competes with the Jaguar and SATA RP lines for best gun money can buy. Designed by painters for the profesional painter. |
|
MINI
GUN
|
|
|
Recommened*
SATA MINIJET 4SR 1.2 2-4CFM@40 Low Air requirements.
Superior finish. Variable fan control, fluid adjustment
and built-in air micrometer Inetlet pressure with
digital controls in the digital version. ToolParadise:
Wow! What a gun. If you are looking for a mini
gun with a 5" fan pattern look no further.
See the Astro version 4020 for a cheaper alternative.
|
|
|
Recommended*
4020 2-4CFM@40 Low Air requirements. Superior
finish. Variable fan control, fluid adjustment.
ToolParadise: Similar to the Sata Minijet
this gun is the professional spayer for those on
a budget. 1.0 & 1.2 Purchase with 1.2 &1.0
tips. |
|
Recommended*
Cat Minijet Master Kit 2-4CFM@40 Low Air requirements. Superior
finish. Variable fan control, fluid adjustment. ToolParadise: One of the best minijet guns on the market. Master kit provides all the sizes necessary for all materials. .8 & 1.0 & 1.2. |
|
Recommended*
DeVilbiss Master Kits 2-4CFM@40 Low Air requirements. Superior
finish. Full size handle for comfortable fit. Variable fan control, fluid adjustment. ToolParadise: One of the best minijet guns on the market. Master kit provides all the sizes necessary for all materials. .8 & 1.0 & 1.2. |
|
Recommended Sharpe Finex 3-7CFM@40 Low Air requirements. Superior
finish. Variable fan control, fluid adjustment. ToolParadise: One of the best minijet guns on the market. One of the best for spraying thick materials like enamels primers and latex. |
|
 |
|
|
|
What
tips should I get?
Recommendations are to be used as a starting
point reference and are not an absolute application for all
refinish material brands. They are not meant to imply that any
given air cap/fluid tip combination can not be used to successfully
spray any given refinish material. Technique and personal preference
must also be considered.
As a general Rule, a 1.7-1.8 HVLP can handle
most thcker wood materials.
If you want a more exact match, Generally, go Urathanes (1.7-1.9) and Wood
Waterbornes (1.5-1.8) and lacquers and enamels (1.5-1.8). Thinner wood materials take a 1.4-1.6 tip set. Many only sprayable products fall in this range. We prefer larger sizes for wood. Stains and dies take (1.0-1.3) We prefer 1.0. We recommend the DeVilbiss Guns
because they generally come with multiple tips to handle all
your finer refinishing needs.
|
Generic
Chart
|
|
HVLP
Gravity
|
Compliant
Gravity
|
Pressure
Feed
|
Single
Stage Urethanes and Polyurethanes
|
Fluid Tip Size
|
1.4mm*
1.5mm
1.6mm |
1.4mm
1.6mm
|
0.8mm - 1.4mm
|
Base
Coats / Conversion Varnish
|
Fluid Tip Size
|
1.3mm
1.4mm*
1.6mm |
1.4mm
1.6mm
|
0.8mm - 1.4mm
|
Clears
|
Fluid Tip Size
|
1.3mm
1.4mm*
1.5mm
1.6mm |
1.2mm
1.3mm
1.4mm
1.6mm
|
0.8mm^
1.0mm
|
Inks,
Dyes, Solvents, Stains
Zahn #2 15 and lower |
Fluid Tip Size
|
.8mm*
1.0mm*
1.2mm
|
.8mm*
1.0mm*
1.2mm
|
0.8mm^
1.0mm
|
Hi-Solid
Clears
|
Fluid Tip Size
|
1.2mm
1.3mm*
1.4mm*
|
1.2mm*
1.3mm*
|
0.8mm^
1.0mm
|
Lacquers
and Enamels
Zahn #2 20 and higher |
Fluid Tip Size
|
1.6mm* or
1.8mm*
2.0mm
2.2mm |
1.6mm*
1.7mm*
1.8mm
|
1.2mm-1.6mm
|
| Waterbornes
/ Acrylic Varnish |
Fluid Tip Size |
1.4mm*
1.5mm*
1.6mm |
1.4mm*
1.5mm*
1.6mm |
1.0mm*
1.1mm*
1.2mm *
|
| Latex
- Only works with thinned latex. Not recommened for house
painting (unless you want your house to look like glass).
Popular items include, trim, cabinets, doors, garage doors,
fireplaces, decorative artwork, etc. |
Fluid Tip Size |
1.8mm* Thinned 33%
2.0mm* Thinned 15%
2.2mm Thinned 10%
|
1.8mm*
2.0mm*
2.2mm |
1.4mm*
1.8mm*
2.0mm |
Latex & BOATS: Gelcoats 2.0 / 2.2
Motorcycles: We recommend the SATA
MiniJet III 1.0SR.
WoodWorking: SATA
MiniJet III 1.2SR
Pressure Pot Series DeVilbiss.or
Sharpe
AirCraft DeVilbiss
Pressure GTI 1.4 Tip Industrial / Touch up SATA MINI 1.2SR
|
|
