 |
240c 4 Stage Turbine with Built in Compressor for use with Pressure Pots
Top of the Line 10 Series
SGW: Contractors and Users - the 10 Series is amoung the lowest overspray HVLP you can purchase. Take the place of your entire airless pump system and produce little overpsray with HVLP.
The 10 series is the best Turbine Gun series on the Market. While it may seem pricey. See what you get - a unit that takes the place of your airless pump system, your fine finish HVLP and it can doulbe as a shop HVLP with the propack Compressor Conversion. 1 System does everything from fine finishing to walls an exteriors, even splatter effects. An it is entirely HVLP.
Modern Bottom Feed Design can be converted to use with a compressor or turbine unit. Disposible Cup allow gun to be sprayed at any angle even upside down. When money is no object get a 3M Accuspray 10 Series. This gun is used in the automotive industry. You will be able to get a great finish on all your materials. Designed from the ground up to operate on the lower power of turbine units. Our setups are the best for professional fine finishing. If you want a particular setup please make a note in the comments section on check out.
Supported by 3M a world wide leader in industrial equipment and supplies
Extremely low overspray levels
Superior Finish Quality
Requires Turbine Unit - Compressor conversion available
Heavy Duty Cycle Turbo IV 4 stage.
STAINLESS STEEL PRESSURE FEED BOTTOM
COMPLETE TURBO IV w/ COMPRESSOR
|
Suggested Tip Sets
.8 Automotive Wood stains
1.1 Standard Thin wood products
1.3 Standard thicker wood products
1.5 Thinned Latex Paint
1.8 Walls and Exteriors
2.0 Splatter Effects
Turbo IV is a four stage turbine with a mini-compressor used to power a 2 Quart remote pot. The remote pot allows larger paint capacity and allows the user to spray in any position, even upside down. The Turbo IV is perfect for jobs is relatively tighter spaces, on the inside and underside of cabinets, trunks, and larger jobs where the 2 Quart of material is necessary.
- 240c Series Turbine with a 2 Quart Pressure Pot and 1/2 Pint Cup
- 4 Stage turbine compressor
- Provides higher speed
- Enables the user to spray higher viscosity coatings with less thinning
Higher model Stainless Steel Fluid passages 10 series included - Delrin available please email.
|
STAINLESS STEEL PRESSURE FEED BOTTOM
COMPLETE TURBO IV w/ COMPRESSOR
PRO - PACK
|
|
| SGW Value Added (not sold separately) - purchase with 10 Spray Gun Only |
|
Disposable Cup Starter Kit 10 liners included
Allows you to Spray in Any Direction even Upsidedown Liners will match your gun whether you choose gravity or pressure feed
Includes Adapter - Recommended use with 4 stage
|
 |
Compressor Conversion - Converts your turbine to be used with a compressor. 7CFM minimum. |
 |
4 Delrin Hi-End Needle Tip Set Refills.
|
 |
Nozzle Tip Set with standard Needle
|
 |
Premium 1 Quart Pressure Cup
|
|
