 |
4 Stage 240 with Top of the line 10 Series Pressure Turbine Gun
SGW: Contractors and Users - the 10 Series is amoung the lowest overspray HVLP you can purchase. 20 LBS can take the place of your entire airless pump system and produce little overpsray with HVLP.
The 10 series is the best Turbine Gun series on the Market. While it may seem pricey. See what you get - a 20 lbs unit that takes the place of your airless pump system, your fine finish HVLP and it can doulbe as a shop HVLP with the propack Compressor Conversion. 1 System does everything from fine finishing to walls an exteriors, even splatter effects. An it is entirely HVLP.
Modern Bottom Feed or Gravity Design can be converted to use with a compressor or turbine unit. Disposible Cup allow gun to be sprayed at any angle even upside down. When money is no object get a 3M Accuspray 10 Series. This gun is used in the automotive industry. You will be able to get a great finish on all your materials. Designed from the ground up to operate on the lower power of turbine units. Our setups are the best for professional fine finishing. If you want a particular setup please make a note in the comments section on check out.
Supported by 3M a world wide leader in industrial equipment and supplies
Extremely low overspray levels
Superior Finish Quality
Requires Turbine Unit - Compressor conversion available
Heavy Duty Cycle 240 4 stage.
PRESSURE FEED BOTTOM
COMPLETE 240 SYSTEM
|
Suggested Tip Sets
.8 Automotive Wood stains
1.1 Standard Thin wood products
1.3 Standard thicker wood products
1.5 Thinned Latex Paint
1.8 Walls and Exteriors
2.0 Splatter Effects
|
GRAVITY FEED TOP
COMPLETE 240 SYSTEM
|
|
|
|
 |
PROPACK - 240 COMPLETE
SPRAY SYSTEM w/ 240 4 Stage Turbine
Best Value - Works on both a Turbine & Compressor
Super Low Overspray
WOOD / INDUSTRIAL / AUTO
 
240 x/ pro pack 10 series gun with a 36-00 regulator which permits use as either a turbine gun or a compressed air gun. The ProPack includes a 10 Gun, two atomizing sets, and the 36-00 regulator.
-
Four Stage Top of the Line Turbine Unit
-
Extra power easily sprays heavier bodied, high solid versions of all coatings
Systems available with Series 10 along with your choice of Nozzle, and Aluminum Air Cap.
-
30 Foot Hose Assembly including a 3 foot Whip Hose and Control Valve
-
Systems available with Series 10 along with your choice of Nozzle, and Aluminum Air Cap. Series 10 Suction Guns come with the standVard 1 Quart.
|
PROPACK - 240 COMPLETE
SPRAY SYSTEM w/ 240 4 Stage Turbine
240 x/ pro pack 10 series gun with a 36-00 regulator which permits use as either a turbine gun or a compressed air gun. The ProPack includes a 10 Gun, two atomizing sets, and the 36-00 regulator.
-
Four Stage Top of the line 240 Turbine Unit
-
Extra power easily sprays heavier bodied, high solid versions of all coatings
Systems available with Series 10 along with your choice of Nozzle, and Aluminum Air Cap.
-
30 Foot Hose Assembly including a 3 foot Whip Hose and Control Valve
-
Systems available with Series 10 along with your choice of Nozzle, and Aluminum Air Cap. Series 10 Suction Guns come with the standard gravity HVLP.
|
|
|
| SGW Value Added (not sold separately) - purchase with 10 Spray Gun Only |
|
Disposable Cup Starter Kit 10 liners included
Allows you to Spray in Any Direction even Upsidedown Liners will match your gun whether you choose gravity or pressure feed
Includes Adapter - Recommended use with 4 stage
PRESSURE FEED 3M PPS
|
GRAVITY FEED 3M PPS
|
|
 |
Compressor Conversion - Converts your turbine to be used with a compressor. 7CFM minimum. |
 |
4 Delrin Hi-End Needle Tip Set Refills.
|
 |
Nozzle Tip Set with standard Needle
|
 |
Small Pressure Cup Bottom
1/2 Pint Cup Assembly
|
Small 250cc Cup an large 1 liter Cup Gravity Feed
|
|
