SGW SGI
latex

PaintSprayGunWorld
  IT'S PARADISE FOR TOOLS! - Ask@SprayGunWorld.com View My Basket
Help/Customer Service
Want real answers? Please call Professor Spray - x 203. Professor Spray will be happy to help you with your spray gun questions or setups. (Please be patient as he handles many calls daily). You may also email your questions at ProfessorSpray@SprayGunWorld.com (Need help? also see the Help Section Below) (¿Necesitas asistencia en español? llamanos: 1-815-1934 Pregunta por: Veronica M-F 10:00am-2:00pm PST).
spacer


latex paint
PROFESSIONAL FINE FINISH
DIY - Oil Based Paints

Penetrol
penetrol

Penetrol® Oil-Based Paint Additive

Enhances penetration and adhesion of oil-based paints and primers

Make interior painting projects flow more smoothly by using Penetrol® Oil Paint Conditioner with oil or alkyd paints. Penetrol reduces brush marks and leveling problems with the paint, and reduces fatigue and frustration with painting projects.

Where To Use
• Add to oil or alkyd paints to condition it to flow more smoothly while improving the penetration and adhesion of the paint.
• Improves leveling so you can expect a smoother coat that’s easier to apply.

Application
 • Stir and mix paint thoroughly and apply. When paint “pulls” or “sets” too fast, add Penetrol until the paint spreads smoothly and easily.
• Let the brush, roller or spray be the guide. Add enough Penetrol to make the paint work smoothly, giving sufficient “wet edge” time.
• Start with about a 10% addition of Penetrol.
• If paint is very thick, or weather hot or cold, 20-30% more Penetrol may be required. (For example, one quart of Penetrol per gallon of paint).
• After paint is used for a while, more Penetrol may be needed.
• NOTE: Addition of Penetrol may raise coating VOC. Please check with local and applicable VOC regulations before using Penetrol.
• The amount of Penetrol needed for easy application of flat, semi-gloss and gloss paints does not change their appearance.

Dry Time
• The majority of oil-based paints when applied at room temperature will be dry (set-to-touch) within 8 to 24 hours.

Clean Up
• Clean up tools with mineral spirits.
• Danger! Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool or waste in a sealed, water-filled metal container.

 


 

 

 

Tip Selections Recommendations
1.4-1.5 for Pressure Feed and Mini Guns (fine finish work).
2.0-2.5 for Gravity Feed Guns.
2.2-2.8 Siphon Feed (siphon not recommended)

gem mini gun
wb mini We have a fantastic Mini Gun Master Kit that sprays latex well. One of the only on the market.
more info
wb mini Gun Only
more info
Low Cost Latex Gun
more info
gem mini gun
wb mini

latex
Our Finest Case See Kit #3
Water and solvent based spray gun
2.0 & 2.5 tip set
more info

wb mini Reduced Pressure Latex Gun for Hi-Speed 2.5 tip set
more info
jaguar HVLP 2.2 Industrial Spray Gun
more info
Low Cost Professional USA Latex Gun 2.2 tip set
more info
finishline III Popular DeVilbiss 1.8 & 2.2 tip Gun
more info
finishline III Low Cost Low CFM Latex Master Model
more info

gem mini gun

Can be used with all sizes of pressure pots 2 Quart, 2 1/2 gallon pots that take a drop in of a 1 gallon or 1 quart pale of paint.
minigun case
wb mini
Complete Mini Gun only 3CFM@40

Water and solvent based spray gun
1.2, 1.5
more info
X Series *Top Choice
Professional Stainless Steel
Super Low CFM HVLP
1.5
more info
wb mini Low Cost Low CFM Latex 1.5
more info
jaguar Low CFM Top of the line HVLP 1.5
more info
Low Cost HVLP Latex Gun 1.5 tip set
more info
Production 1.5 Tip Set Top of the line USA
more info
Other Notables 1.4 for thinned enamels and latex
All Around Favorite DeVilbiss Compact
more info
spray vantage Best Bargain Binks SV 100 Pressure Feed
more info