DeVilbiss, Iwata, Asutro AOM, Sharpe, Astro Pneumatic, Binks

CFM
(@40psi)

These are usually high quality "wheel barrel" compressors and upright compressors with single and double stage motors.
You can use most any gun with satisfaction at this level all the way up to 13.5CFM@30 psi.*

Typically if it is 220v there's no problem. For 110v you need a good one to get upward of high 7s to 8CFM.

8 CFM@40 This is a great level for consumer grade compressors. Sears makes an 8.6 @ 40 compressor that runs off a 110 outlet

EMAIL US FOR SOME FAVORITES IF YOU ARE HAVING A HARD TIME CHOOSING.

Ask Us Form or email at Ask@spraygunworld.com
(all information is confidential)

Full Sized Guns

This is a very good compressor.
For wood working you can use almost any spray gun all the way up to 13.5CFM@30 and get satisfactory resultsl Feel Free to Look around at SprayGunWorld.com.

Feel Free to Look around at SprayGunWorld.com at all our spray guns.

PANEL WORK OR WOODWORKING LIGHT INDUSTRIAL

For automotive you can do panel work, hoods, bumpers with no problem. and you can use almost any spray gun all the way up to 13.5 CFM @30 PSI. The only time you need to match the CFM rating with the gun is for entire car clear coats where there are no right edges to stop. As an alternative you can add anther tank, chain compressor together, or you can do a criss cross method with two wet edges.

ALL OVERS - AUTO

For automotive complete cars 8 CFM is perfectly matched with any LVLP Spray Gun or Any Asturo Spray Gun, ANI Spray, the Devilbiss Plus or, 90 or 93 Binks or CAT L100 HVLP. Feel Free to Look around at SprayGunWorld.com.