Ask@SprayGunWorld.com   YOUR 1 STOP SHOP FOR PAINT GUNS AND SUPPLIES! How to Setup your Spray Gun

NOTE: When setting up a spraygun for spraying a specific material, it is recommended to use the lowest possible pressure settings to achieve the desired results. Excessive fluid and air pressures
result in premature nozzle replacement, greater overspray, and more frequent booth filter repacement.

PRESSURE FEED SETUPS

	This is the most common setup for HVLP units. We Recomend you have a fluid control regulator, guage, or mini diaphram regulator on the bottom of the gun, but it is not necessary
	This is setup adds another guage on the line to the spray gun. If you do not have a fluid control regulator, guage, or mini diaphram regulator on the bottom of the gun, this 2nd guage will help you regulate the air to the spray gun. This is especially important for HVLP units.
	Air Assisted Airless Systems are for production houses. They are faster moving units and use an additional pump system in addition to a compressor.