spacer
back
wood
Ask@SprayGunWorld.com

110v Compressors - No Problem! Hi-End Pro Results
white
Bluebar
spacer
Pro Factory Finishes - Small 110v Compressor No Problem!
spacer
cart
Bluebar
spacer

WARNING: THSE ARE PROFESSIONAL GUNS FOR TRUE FACTORY FINISHES
PRO QUALITY GUNS on SMALLER HOBBY 110v COMPRESSORS!

These are not hobby guns!

SGW: Stop fooling Around with Hobby Equipment with Hobby Results. SGW HVLP guns are the same ones used in the factories and hi-end repair facilities around the world.

pressure pot

diy

SGW recommends a 1 1/2" HP min compressor for serious work. 2HP is better. Typically, a 110v compressor will limit you to less than 8cfm. Almost every USA gun requires more air. That is why many stores will tell you you need a really big compressor to spray HVLP. Or they will give you the 7cfm hobby guns that are not great and do not last long... or a 4cfm east gun that has a lot of orange peel..

 
 

110v Compressors - No Problem! Hi-End Pro Results

Don't let anyone tell you you can't spray PRO HVLP with a small compressor. Talk to Professor Spray!

.We feature Hi-End Low CFM Professional Guns from the #1 Professional Low CFM Gun leader. Yes, you can get a job in a Mercedes Benz Body shop with these guns.

The Low CFM Gun Leader features Some of the finest quality hvlp spray guns that run on less air. They even out finish most 13-15cfm guns on the market. With excellent design, the lower CFM does not affect finish quality, they will spray as well at top German and Japanese Guns The only thing it affects is a little smaller fan pattern. You are looking at a 11" fan instead of a 12"" fan found in most higher CFM guns.

 


gun
EASY TO USE AND CLEAN GRAVITY FEED
GRAVITY FEED GUNS (automotive and similarly sized objects)
2 cfm (4" fan pattern)
3cfm Recommended Mid Gun (7" fan pattern -) - See also
Master Case 12oz / 24oz
4cfm (10" fan pattern - top performer)
5cfm-6CFM (11" fan pattern - Extreme Hi-End Performance)

Remember you can chain 2 compressors together so pick up a $80 compressor and add it to your current one to get more CFM.


super NO COMPLESSOR? ALL IN ONES

No Compressor? We suggest you get one for around $100-$300 or you can purchase an all in one unit -

Weekend Warrior DIY Home Owner Doing your own home a great DIY System
PRO SERIES Used by Profesional Cabinet Makers

 


gun LARGER JOBS AND SMALL CONTRACTORS
PRESSURE FEED GUNS
3cfm (7" fan pattern)
4cfm (10" fan pattern)
5cfm (10" fan pattern - Top Performer)
6cfm+ (11" fan pattern - Extreme Hi-End)

 

 

*please note these are bottom CFM numbers. Many Compressors are overrated which means that you can do panel work with ease but not non stop spraying. This is not as big an issue for DIY where time is not as serious a factor as a busy body shop.

 

 
privacy@sitename.com
lineBluebar
spacer
logo
ups
spacer