 |
PLEASE
NOTE: YOU ARE NOW AT OUR AUTOMOTIVE SITE SPRAYGUNWORLD.com.
 Our
HVLP, Reduced Pressure Complaint and Conventional Guns are all professional
grade designed for fine-finishing. You will find them at your Mercedes
Benz, Porsche, BMW, Cadillac etc. body shops...
What our professional guns are designed
to do: Our guns are designed to spray a flawless finish like you would
expect from any top rated $3,000-$5,000+ paint job or show car. Remember
you are spraying with the same guns professionals use. In fact, since
many body shops make their painters purchase their own guns, you may be
spraying with a better gun than your local body shop is using on your
$3,000 paint job. By shopping with us and using good equipment you are
assured the best results on the market today. We have even had painters
using single stage Omni paint and created a mirror finish WITHOUT BUFFING.
Now that's amazing! After understanding the quality of the guns we sell,
we have also had people purchase guns and "give them" to the
painter who is painting their car.
Why not buy from my local store?
The guns we recommend are standards in the automotive industry. Some
of the paint gun companies we sell have been in the painting business
for over 100 years. Every gun we sell is professional quality that
can be used to get a job in the automotive industry. We bring these top
rated guns to you at wholesale prices. A local store will not be able
to match our prices as they most likely purchase their guns at the same
price we are selling them direct to the public. A local store may
attempt to question our pricing or try to sell you a copy or no name brand,
however we do not recommend these as quality varies tremendously with
these products. We deal in the automotive industry and we know what we
are doing! Take heart in our recommendations, have fun choosing a gun,
and you will be satisfied.
Just
for fun, Please take a look at our
PRESSURE SETUP: Not needed, Rarely used in the automotive industry.
|
 GRAVITY
FEED: Today almost all Automotive painters use gravity guns. They
provide better atomization than suction feed and are easy to use and
clean up. We have several suggestions below. |
SUCTION FEED: Old timers still use these guns and variations on
these guns. There are traditional guns here along with newer guns
with improved transfer efficiency. Take a look at our "Old Timers"
Section - HERE |
|
 
We have many great guns, you will get an excellent result out of
any gun we sell, however, these stand out just a bit.
|
<
$100 Range
|
|
|
Recommended*
Advanced Design 3 gun set - Designed to spray both primer and base/clear/single
stage paints for under $100.00 These guns are good enough
for a professional body shop but have been brought to you
at a price point equal to most lower grade hobby guns at Sears,
Harbor, and your local home improvement store. They have Low
air consumption and stainless steel needle and tip. They are
a great bargain and we recommend them for any serious hobbyist
or beginning professional. Tool Paradise: Great inexpensive
starter set. Professional quality at an affordable price.
Our entry level choice for Professionals and serious hobbyists.
Much better than the guns purchased at Sears and Home Depot. |
|
|
 |
Recommended*
Sharpe Finex - This new line by Sharpe Blows the market
away by entering with an excellent gun at a very low price
point. The quality of the guns are excellent and the spray
quality is good enough for a professional. They are a great
bargain and we recommend them for any serious hobbyist or
beginning professional. ToolParadise: Great inexpensive
starter set. Professional quality at an affordable price.
If you local store is carrying these you may purchase them
here and save. |
|
$100
Range
|
|
|
|
Recommended*
Astro HVLP QUL and EVO Low air consumption and stainless
steel needle and tip. Great for waterbornes and lacquers and
enamels. ToolParadise: The finest professional Low
Cost Set on the Market. Professional quality at an affordable
price. Our First entry level choice for Professional Woodworkers
and autobody workers. Superior performance. Compares with
guns costing $300.00 or more. Purchase the QUL 103 for Clears,
the QUL105 for Single Stage and Thick Clears, and QUL 107
or 109 for primer. Can Purchase Tips Separately.
Check out our Low Cost DREAM Setup from Astro |
|
|
 |
Recommended*
Devilbiss Finishline III - Classic DeVilbiss Finish at
an economical price. This Third generation gun, precision
engineered, produces a well-atomized, uniform spray pattern
with accurate, repeatable settings. Tip sets are all made
in the USA by Sharpe, Gun washer safe. ToolParadise:
Our First Choice for the serious hobbyist. Comes
with all you need to get started, from gun hook, regulator
and tips. We like the versatility of having an all in one
package with multiple tips. We also like the famous DeVilbiss
Finish. Recommend keeping Gun clean for long life. This is
a great gun. Comes with 1.8 Tips. For Single Colors and Waterbornes
1.8 tip for thicker enamels and Lacquers. 2.2 Latex Tip Available.
|
|
$200
Range
|
|
|
|
Recommended*
DeVilbiss GFG 670 High Efficiency Spray Gun- This is a
professional gun with the same ratings are HVLP guns. It is
a high solids clearcoat gun of choice – precision-engineered
#410 air cap lays out a smooth, high gloss finish. DeVilbiss
quality creates a gun with a higher transfer efficiency –
Greater than 65% transfer (comparable to the SATA RP). Includes
three tips, which eliminates guesswork, and is Waterborne
Compatible. ToolParadise: You will not find a better gun at this price point. Our no compromise student set for under $250 complete. This is our favorite auto boat marine and woodworking
gun for the professional or serious Hobbyist. Don't let its
RP status fool you. This gun lays down a superior even
finish with little overspray. |
|
|
 |
Asturo ECO SX K1- Premium performance and quality. Excellent
results with all materials. Specially created to handle waterborne materials. ToolParadise:
Great Spray Gun kit. 1.0 waterbase 1.3 base 1.4 clear |
|
 |
 
Once you choose a gun, Make sure you get the correct
tip(s)
Recommendations are to be used as a starting point
reference and are not an absolute application for all refinish material
brands. They are not meant to imply that any given air cap/fluid tip combination
can not be used to successfully spray any given refinish material. Technique
and personal preference must also be considered.
GENERAL
RULE
|
(1.3 or 1.4) - As a general
Rule the most important gun is your Finishing Gun - So if you
only afford 1 gun get a 1.3 or 1.4 HVLP or RP Spray Gun
(1.6-1.8) - If you can
afford another tip set or gun for priming (we recommend using a
different gun) a 1.7-2.0 HVLP or 1.6-2.0 RP Gun or Conventional
Gun. Quality is not as important for priming guns as you will
be buffing and sanding. Some inexpensive Priming Guns.
|
MORE
SPECIFIC
Please contact your paint manufacturer for recommendations. You are
using an HVLP Gravity Feed Gun
If you want a more exact match, Generally, go smaller for Clears
Urethanes (1.2-1.4) and larger still for primer surfaces (1.5-2.0).
We recommend the DeVilbiss Guns because they generally come with multiple
tips to handle all your finer refinishing needs.
|
Generic
Chart
|
|
HVLP
Gravity
|
Compliant
Gravity
|
Pressure
Feed
|
| Primer
Surfacers (Thick) |
Fluid Tip Size |
1.6mm
1.8mm*
2.0mm |
1.6mm
1.8mm*
2.0mm |
1.0mm
- 1.4mm |
| Primers
and Sealers |
Fluid Tip Size |
1.4mm
1.5mm
1.6mm*
1.8mm |
1.4mm
1.5mm
1.6mm*
1.7mm
1.8mm |
1.0mm
- 1.4mm |
Single
Stage Urethanes and Polyurethane
|
Fluid Tip Size
|
1.4mm*
1.5mm
1.6mm* |
1.4mm*
1.6mm*
|
0.8mm - 1.4mm
|
Base
Coats
|
Fluid Tip Size
|
1.3mm*
1.4mm*
1.6mm |
1.2mm*
1.3mm*
1.4mm*
1.6mm
|
0.8mm - 1.4mm
|
Clears
|
Fluid Tip Size
|
1.3mm
1.4mm*
1.5mm
1.6mm |
1.2mm
1.3mm
1.4mm
1.6mm
|
0.8mm^
1.0mm*
|
Hi-Solid
Clears
|
Fluid Tip Size
|
1.2mm
1.3mm*
1.4mm*
|
1.2mm*
1.3mm*
|
0.8mm^
1.0mm*
|
| Lacquers
and Enamels >20 sec Zahn #2 |
Fluid Tip Size |
1.4mm
1.5mm
1.6mm* |
1.4mm*
1.6mm*
|
1.0mm
- 1.4mm
|
Our Recommendations
Motorcycles: We recommend the SATA
MiniJet III 1.0SR.
 
We have a large selection
of filters for your spray gun starting for less than $10.00
CLICK
HERE
 MORE
HELP
A
LITTLE HISTORY / HOW TO PAINT A CAR
/ HOW TO CLEAN MY SPRAY GUN / CFM
QUESTIONS - HOW BIG A COMPRESSOR DO I NEED / IF
I DO NOT HAVE A BIG COMPRESSOR CAN I STILL PAINT MY CAR? / IF
MY COMPRESSOR IS VERY SMALL (<4cfm@40) CAN I STILL SPRAY?
|
