Sharpe 8130 (Recommended)
One of our favorite filters - Save money with Reusable Filter Element. Provides top of the line basic filtration 5 microns for spray guns - 1/2" inlet 3/8" & 1/4" outlet 75CFM

8135 - Same as above but with 1/4" fittings Inlet and 1/4" fittings outlet 75CFM

See regulated units in $90 category

Sharpe 6710 (Recommended)
Larger Unit than 8130 provides greater air flow and more water dirt and oil holding capacity 1/2" inlet 2-3/8" outlets 120 CFM

See regulated units in $90 category

$80 CATEGORY ADDS A DIAPHRAGM REGULATOR

Diaphragm Regulated wall units provide not only clean air but also regulated CFM flow. The diaphragm keeps line pressure constant even though fluctuations occur in the compressor or bent hoses. They also let you control the air line from the wall as opposed to the compressor.

CATechnology 52511
(Best Bargain) Only Single Unit that you need - 1 micron 2nd filter not necessary
One of our favorite filters. Most effective professional low cost product on the market. 60 CFM 1 micron filtration plus diaphragm regulator at a tremendous price. Long lasting filter elements last 6 months. - 1 diaphragm regulator

Replacement Cartridge 52551

Motorgaurd M30 & M45 (Recommended)
One of our favorite filters. Lower Usages Costs - Great for waterbase and solvent based - Nowhere else can you get .01 micron filtration for such a low price. Common known as a "toilet paper" filter - (i.e. because people cheat and put a toilet paper roll inside the filter instead of purchasing replaceable filter packs), these 2nd filter units provide tremendous air protection at the lowest costs in the industry.

We recommend these units as a 2nd filter after a watertrap or primary 5-40 micron filter such as the Astro or Shapre filters in the $30 Category or 1-5 micron filters in the $90 Category. You may use the Motorgaurd filter as your only primary filter system however, please be aware that your filter life will be lessened due to large particles getting filtered in the unit. Under normal circumstances, we recommend filter changes about once every month and a half of heavy use.

Wall bracket included 1/4" fittings 45CFM @ 90PSI

Motorgaurd M60 & M100 (Recommended)
Larger 1/2" fittings provide greater airflow - 100CFM @90 PSI
Great for waterbase and solvent based -

Hanging Unit (no brackets) top 1/2" fittings.

WATERBASED FILTER
Motorgaurd M-C100
Carbon Filter - great for waterbase painters having oil problems
The Motor Guard Model M-C100 Activated Carbon Filter removes oil vapor and other contaminants from compressed air through the adsorption process. In this process, microscopic pores in the activated carbon media trap individual oil molecules while clean air passes through. The Motor Guard’s Activated Carbon Filter features the exclusive Carbon-Max® cartridge. The filter element contains an expanded volume of activated carbon media to deliver air to the spray gun that is virtually free of oil vapor (<.01 ppm by weight). Designed for maximum airflow at a minimum pressure drop, the extended carbon content of the Carbon-Max® cartridge means that compressed air spends the maximum time in contact with the carbon media for more complete vapor removal. The addition of the M-C100 as the final stage in an existing air management system ensures defect-free finishing with waterborne materials.